Yamaha mt-1x User Manual

The MT1X is equipped with an AUX SEND jack  and two (left and right) AUX RETURN jacks When special

acoustic effects are desired on a certain channel, reverbs or delay effects can be connected between these jacks to
provide only the desired effect to the desired channel. Amplified monitor speakers can also be connected to the AUX
SEND jack. Each AUX control adjusts the sources connected to the AUX SEND jack in the following manner.

Performers or sound mixers can control the level balance of the four channels (instruments) with the AUX controls , with the total output

level adjusted by the AUX MASTER SEND control 

This controls the level of all the input faders, as well as the final level of the effected signal of the AUX RTN control

 and the sound mixed through the stereo mix buss. The output level of the ST OUT jack  (the recording level

at mixdown) and the recording level during ping-ponging are also adjusted with this control.

Set the control input faders at “7” for best results. 6