Yamaha P-100 User Manual
MIDI UTILITY MODE SETTINGS
MIDI Utility mode
In addition to its Single, Dual, Split, and Demo Play modes, the P-100 has a MIDI Utility mode which allows you to
make a number of settings related to MIDI control functions. Below is a listing of the settings available in this mode:
make a number of settings related to MIDI control functions. Below is a listing of the settings available in this mode:
SETTING DESCRIPTION BUTTONS
Transmit and receive channels MIDI + CHANNEL
Local control on/off MIDI + LOCAL
MIDI merge function on/off
Bulk protect on/off
Pitch bend range
Modulation wheel on/off
CS slider assignment
MIDI + MERGE
MIDI + PROTECT
MIDI + PB
MIDI + MW
MIDI + CS
Foot controller assignment MIDI + FC
Program change transmit table MIDI + PC TRNS
Program change receive table MIDI + PC RECV
You can enter MIDI Utility mode by pressing the appropriate [VOICE/UTILITY] buttons while holding down the
[MIDI] button.
When you do so, the LEDs above both the [MIDI] button and the [VOICE/UTILITY] button you pressed will begin
blinking, and the current setting for the parameter you selected will appear in the display. You can use either the
blinking, and the current setting for the parameter you selected will appear in the display. You can use either the
[DATA ENTRY] slider or the [-1] and [+l] buttons to change this setting.
When you’ve finished making your settings, press the [MIDI] button once again to exit MIDI Utility mode. Most of
the functions described previously (i.e., the voice selection, tuning
the functions described previously (i.e., the voice selection, tuning
and transpose functions, etc.) will not work while
the P-100 is in MIDI Utility mode; therefore. you will have to leave this mode in order to use these functions.
31