Yamaha qs300 User Manual
122
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Step Accompaniment Recording
In Step Accompaniment Recording, there are two separate
displays for recording, depending on the track you select:
Pattern or Chord. In each of these you can individually
enter or delete Pattern and chord changes at precisely the
desired locations.
displays for recording, depending on the track you select:
Pattern or Chord. In each of these you can individually
enter or delete Pattern and chord changes at precisely the
desired locations.
To use Step Accompaniment Recording: ...........................
1.
Call up the Song mode and select a Song.
Select an empty song if you want to record a new song
in the step record mode, or select a song that already
contains data if you want to make changes or additions.
Select an empty song if you want to record a new song
in the step record mode, or select a song that already
contains data if you want to make changes or additions.
2.
Press
r to set record to standby.
3.
Select Step Recording by pressing
& (Step).
4.
Select the Pattern track or Chord track.
F1
F2
F3
F4
F5
F6
F7
F8
3.
Press
&
to select
Step Recording
4.
Select the Pattern or
Chord track.
Chord track.
5.
Press
R to call up the Pattern Entry or Chord
Entry display, and begin recording the data.
Refer to the corresponding section below (Pattern
Entry or Chord Entry) for details on how to enter the
desired data.
Refer to the corresponding section below (Pattern
Entry or Chord Entry) for details on how to enter the
desired data.
6.
To stop recording and leave the Pattern Entry or
Chord Entry display, press
Chord Entry display, press
T.
Repeat steps
2, 4, 5 and 6 above when changing between
Pattern Entry and Chord Entry.