Yamaha R-S300BL User Manual

By connecting a Wireless System for iPod to this unit, you 
can play songs on your iPhone/iPod and listen to them 
using a wireless connection.

y

You can use the remote control to control the iPhone/iPod. For 
more information, see page 25.

When playing an iPhone/iPod using a Wireless System for iPod, 
playback information is not displayed on the front panel display.

■ Establishing a wireless connection

Once the iPhone/iPod is connected to the YID-W10 
transmitter and playback begins, it takes about 5 seconds 
for audio to be heard. During this time the wireless 
connection between the YID-W10 transmitter and 
receiver is established.
The status of the wireless connection between the YID-
W10 transmitter and receiver is indicated by the 
respective indicator.

■ Controlling this unit with your iPhone/

• When playback begins on an iPhone/iPod that is 

connected to a YID-W10 transmitter, and if the YID-
W10 transmitter is within range of the YID-W10 
receiver, this unit performs as follows:
– If this unit is already turned on when playback 

begins: The input source switches to DOCK.

– If this unit is in standby mode when playback 

begins: This unit turns on and the input source 
switches to DOCK.

• In the following situations, the wireless connection 

between the transmitter and receiver is disconnected. 
After 30 seconds this unit automatically enters standby 
mode.
– The iPhone/iPod is not operated for about 30–120 

seconds after the playback is paused.

– The sleep timer of the iPhone/iPod is activated.
– The iPhone/iPod is disconnected from the YID-

W10 transmitter.

– The iPhone/iPod battery level decreases to a level 

where it cannot provide enough power to the YID-
W10 transmitter.

– The YID-W10 transmitter is moved outside of the 

wireless communication range of the YID-W10 
receiver.

– Communication between the YID-W10 transmitter 

and receiver becomes disrupted due to interference 
from other wireless LAN devices, cordless 
telephones, microwave ovens, etc.

y

These features can be disabled by setting “Interlock” to “OFF” in 
the Option menu (see page 30).

• Adjusting the volume on the iPhone/iPod also adjusts 

the volume of this unit. The iPhone/iPod can increase 
the volume to up to 0 dB (or the value set for the 
“MaxVol” setting in the Option menu). To further 
increase the volume, adjust the volume using this unit’s 
VOLUME control or the remote control.

y

• When this unit is turned on or is in standby mode, your iPhone/

iPod can be charged automatically if the YID-W10 transmitter 
connected to your iPhone/iPod is stationed in the YID-W10 
receiver. If an iPhone/iPod is charged while this unit is in 
standby mode, the power indicator lights up brightly.

• Refer to the operating instructions of the YID-W10 for more 

information.

No connection

Off

Off

Confirming 
connection

Green, flashing

Blue, flashing

Connected

Green, lit

Blue, lit