Yamaha RX-V1600 User Manual

• C;NG appears in the display window if clearing was 

unsuccessful. In this case start over from step 3.

• ERROR appears in the display window if you press a button not 

indicated in the respective step, or if you press more than one 
button simultaneously.

■ Clearing a learned function

You can clear the function learned for a certain button in 
each control area.

Press an input selector button to select the 
source component containing the function 
you want to clear.
The selected component name appears in the display 
window.

Press LEARN using a ballpoint pen or similar 
object.
LEARN and the selected component name 
(ex. DVD) appear alternately in the display window.

• Do not press and hold LEARN. If you hold it down for 

more than 3 seconds, the remote control enters the remote 
control code setting mode.

• If you do not complete each of the following steps within 

30 seconds, the learning mode will be automatically 
canceled. In this case, press LEARN again.

Press and hold CLEAR using a ballpoint pen 
or similar object and then press the button 
you want to clear for about 3 seconds.
C;OK appears in the display window if clearing was 
successful.

y

• If you continuously want to clear another function, repeat 

step 4.

• If you continuously want to clear another function for 

another component, press SELECT k / n to select the 
component, then repeat step 4.

• Once you clear a learned function, the button reverts to the 

factory setting (or to the manufacturer setting if you have 
set remote control codes).

Release the object used to press CLEAR to 
exit the clearing mode.
The remote control returns to the learning mode.

• C;NG appears in the display window if clearing was 

unsuccessful. In this case, start over from step 4.

• ERROR appears in the display window if you press a button not 

indicated in the respective step, or if you press more than one 
button simultaneously.

CLEAR

LEARN