Yamaha RX-V659 User Manual

Page of 132
45
USING AUDIO FEATURES
BA
S
IC
 
OPE
R
A
T
IO
N
You can mix down multi-channel sources to 2 channels 
and enjoy playback in 2-channel stereo.
Set the component selector switch to AMP and 
then press STEREO on the remote control 
repeatedly to select “2ch Stereo”.
y
• You can use a subwoofer with this program when “LFE/BASS 
OUT” is set to “SWFR” or “BOTH” (see page 88).
• You can also select the “2ch Stereo” mode by rotating the 
PROGRAM selector on the front panel.
When this unit is in the “STRAIGHT” mode, 2-channel 
stereo sources are output from only the front left and right 
speakers. Multi-channel sources are decoded straight into 
the appropriate channels without any additional effect 
processing.
1
Set the component selector switch to AMP 
and then press STRAIGHT on the remote 
control to select “STRAIGHT”.
2
To deactivate the “STRAIGHT” mode, press 
STRAIGHT on the remote control again so 
that “STRAIGHT” disappears from the front 
panel display.
The sound effect is turned back on.
y
You can also select the “STRAIGHT” mode by pressing 
STRAIGHT (EFFECT) on the front panel.
The Pure Direct mode turns off the video circuitry and the 
front panel display, allowing sources to bypass the 
decoders and DSP processors of this unit so that you can 
enjoy pure hi-fi sound from 2-channel PCM and analog 
sources.
Press PURE DIRECT on the front panel (or set 
the component selector switch to AMP and then 
press PURE DIRECT on the remote control) to 
turn on or off the Pure Direct mode.
• To avoid unexpected noise, do not play CDs encoded in DTS 
when this unit is in the Pure Direct mode.
• When multi-channel signals (Dolby Digital and DTS) are input, 
this unit automatically switches to the corresponding analog 
input. When “DTS” is selected as the input mode (see page 41), 
no sound will be output.
• No sound will be output from the subwoofer.
• The front panel display automatically dims.
• The following operations are not possible when this unit is in 
the Pure Direct mode:
– switching the sound field program
– displaying the OSD
– adjusting the “SET MENU” parameters (except for speaker 
level settings)
– operating video functions (video conversion, etc.)
• The Pure Direct mode is automatically canceled whenever this 
unit is turned off.
y
• The indicator around the PURE DIRECT button on the front 
panel lights up while this unit is in the Pure Direct mode.
• The front panel display turns on momentarily when an 
operation is performed.
Enjoying multi-channel sources in 
2-channel stereo
Enjoying unprocessed input 
sources
STEREO
1
AMP
SOURCE
TV
2ch Stereo
EFFECT
STRAIGHT
ENT.
AMP
SOURCE
TV
STRAIGHT
Enjoying pure hi-fi stereo sound
Notes
AMP
SOURCE
TV
PURE DIRECT
8
PURE DIRECT
Front panel
Remote control
or