Yamaha RX-V1900BL User Manual

• Be sure to make the same type of video connections as those made for your TV if the video conversion is disabled. For example, if you 

connected your TV to the VIDEO MONITOR OUT jack of this unit, connect other components to the VIDEO jacks.

• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright 

laws.

• If you connect your DVD player to both the OPTICAL and COAXIAL jacks, priority is given to the signals input at the COAXIAL 

jack.

• OSD signals are not output at the DVR OUT and VCR OUT jacks and cannot be recorded.
• To make a digital connection to a component other than the default one assigned to each DIGITAL INPUT or DIGITAL OUTPUT 

jack, configure the “I/O ASSIGNMENT” setting (page 82).

• When connecting a turntable with a low-output MC cartridge to the PHONO jack, use an in-line boosting transformer or MC-head 

amplifier.

• Connect your turntable to the GND terminal of this unit to reduce noise in the signal.

■ Connecting an external amplifier

This unit has more than enough power for any home use. 
However, if you want to add more power to the speaker 
output or if you want to use another amplifier, connect an 
external amplifier to the PRE OUT jacks. Each PRE OUT 
jack outputs the same channel signals as the 
corresponding SPEAKERS terminals.

• When you make connections to the PRE OUT jacks, do not 

make any connections to the SPEAKERS terminals.

• Adjust the volume level of the subwoofer with the control on 

the subwoofer.

[1] CENTER PRE OUT jack
Center channel output jack.

[2] FRONT PRE OUT jacks
Front channel output jacks.

[3] SURROUND PRE OUT jacks
Surround channel output jacks.

Audio

Video

Video out (composite)

VIDEO (VCR IN)

Audio recording

Video recording

Video in (composite)

VIDEO (VCR OUT)

Audio

Audio out (analog)

AUDIO (CD)

Audio

Audio recording

Audio in (analog)

AUDIO (MD/CD-R OUT)

Audio