Yamaha RX-N600 User Manual
100
En
USING MULTI-ZONE CONFIGURATION
■
Setting the remote control to the Zone 2
mode
mode
The remote control is originally set to the main mode to control
the main zone. To control Zone 2 with the remote control, you
must first set the remote control to the Zone 2 mode.
the main zone. To control Zone 2 with the remote control, you
must first set the remote control to the Zone 2 mode.
1
Press CODE SET using a ballpoint pen or a
similar object.
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
flashes twice.
2
Press the numeric buttons to enter the code
number “9992”.
number “9992”.
■
Controlling Zone 2 with the remote
control
control
• The remote control is originally set to the main mode to control
the main zone, and the TRANSMIT indicator on the remote
control is turned off when the remote control is set to the main
mode.
control is turned off when the remote control is set to the main
mode.
• When the remote control is set to the Zone 2 mode, POWER,
STANDBY, MUTE, and the input selector buttons are set to
control Zone 2. However, the rest of the remote control buttons
remain in the main mode.
control Zone 2. However, the rest of the remote control buttons
remain in the main mode.
• The remote control automatically exits from the Zone 2 mode in
the following cases:
– when you do not make any operations within 10 seconds after
– when you do not make any operations within 10 seconds after
the remote control is set to the Zone 2 mode.
– when you press a remote control button other than POWER,
STANDBY, MUTE, and the input selector buttons.
1
Press and hold POWER or STANDBY and
then press
then press
to set the remote control to
the Zone 2 mode.
• Press POWER when the main zone is turned on.
• Press STANDBY when the main zone is turned off.
The TRANSMIT indicator on the remote control
lights up while the remote control is set to the Zone 2
mode.
• Press STANDBY when the main zone is turned off.
The TRANSMIT indicator on the remote control
lights up while the remote control is set to the Zone 2
mode.
2
Press POWER to turn on Zone 2.
3
Press one of the input selector buttons to
select the desired input source of Zone 2.
select the desired input source of Zone 2.
y
To mute the audio output of Zone 2, press MUTE on the
remote control. Press MUTE again to resume the audio
output of Zone 2.
remote control. Press MUTE again to resume the audio
output of Zone 2.
4
Press STANDBY to set Zone 2 to the standby
mode.
mode.
Note
Notes
TRANSMIT
CODE SET
Flashes
STEREO
1
EFFECT
STANDARD
5
SPEAKERS
9
MUSIC
2
SELECT
6
ENHANCER
0
ENTERTAIN
3
EXTD SUR.
7
NIGHT
10
MOVIE
4
DIRECT ST.
8
STRAIGHT
ENT.
TRANSMIT
Flashes
TRANSMIT
POWER
Lights up
While holding
down
STANDBY
or
POWER
CD
MULTI CH IN
SLEEP
CD-R
XM
DVD
DTV
MD
DOCK
USB
CBL
NET
TUNER
V-AUX
DVR
MUTE
STANDBY