Yamaha RX-497 User Manual

■ ADVANCED SETUP menu parameters

Change the initial settings (indicated in bold under each 
parameter) to reflect the needs of your listening 
environment.

PRESET

Use to reset all parameters to the factory presets.
Choices: CANCEL, RESET
• Select CANCEL if you do not want the parameters of 

this unit to be initialized when you reset the factory 
presets.

• Select RESET if you want all of the parameters of this 

unit to be initialized when you reset the factory presets.

• This setting does not affect the parameters in the ADVANCED 

SETUP menu.

• The resetting process starts next time you turn on the power of 

this unit.

REMOTE 

Use to switch the remote control ID of this unit.
Choices: ID1, ID2
• Select ID1 to operate this unit using an alternative 

code.

• Select ID2 to operate this unit using the default code.

You must also make settings for the remote control (see page 36).

TU

(Asia and General models only)
Use to switch the frequency step selection according to the 
frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• North, Central and South America: 

AM10/FM100 (kHz)

• Other areas: AM9/FM50 (kHz)

The ADVANCED SETUP menu is displayed in the front 
panel display.

y

• During the ADVANCED SETUP procedure, audio output is 

muted.

• During the ADVANCED SETUP procedure, only MASTER 

ON/OFF, A/B/C/D/E and the preset station/channel number 
buttons (1 and 2) on the front panel are operational.

Press and hold A/B/C/D/E on the front panel 
and then press MASTER ON/OFF inward to 
the ON position.
The power of this unit is turned on, and the 
ADVANCED SETUP menu appears in the front 
panel display.

l TUNING/CH h

∞