Yamaha RXV3000RDS User Manual

18

■

Select the position whose requirements your speaker system meets.

 (Upper position)

The impedance of each speaker must be 6

Ω

 or higher.

The impedance of each speaker must be 6

Ω

 or higher.

The impedance of the speaker must be 6

Ω

 or higher.

CENTER: The impedance of the speaker must be 4

Ω

 or higher.

If you use one pair of main speakers, the impedance of each speaker
must be 4

Ω

 or higher.

If you use two pairs of main speakers, the impedance of each speaker
must be 8

Ω

 or higher.

 (Lower position)

The impedance of each speaker must be 8

Ω

 or higher.

The impedance of each speaker must be 8

Ω

 or higher.

The impedance of the speaker must be 8

Ω

 or higher.

CENTER: The impedance of the speaker must be 8

Ω

 or higher.

If you use one pair of main speakers, the impedance of each speaker
must be 8

Ω

 or higher.

If you use two pairs of main speakers, the impedance of each speaker
must be 16

Ω

 or higher.

■

Plug in this unit to a wall outlet when all connections are complete.

• Do not use other AC power cords than the one provided.

■

Use these to connect the power cords from your other components to this unit. The
power to the switched outlets is controlled by this unit’s 

(

 or 

 on the remote). These outlets will supply

power to any connected unit whenever this unit is turned on. The maximum power
(total power consumption of components) that can be connected to 

is 100 W.

Do not change the 

 switch setting while the power to

this unit is on, otherwise this unit may be
damaged.
IF THIS UNIT FAILS TO TURN ON
WHEN THE STANDBY/ON SWITCH IS
PRESSED:
The 

 switch may

not be set to either end. If so, set the switch to
either end when this unit is in the standby
mode.

G.

Ω

Ω

Ω

Ω

Ω

Ω

Ω

Ω

Ω

Ω

Ω

Ω

AC OUTLETS

IMPEDANCE SELECTOR switch

AC Power Cord