Yamaha RXV3000RDS User Manual
English
57
Adjusting the Levels of the Effect Speakers
You can adjust the volume level of each effect speaker (Center, Right Rear, Rear Center, Left Rear, Front Effect, and Subwoofer) while
listening to a music source.
listening to a music source.
1
1
Set
PARAMETER/SET MENU
to
PARAMETER
.
2
2
Press
LEVEL
to select the speaker(s) you want to adjust.
Each time you press this button the selected speaker changes and appears in
the front panel display only as follows: Center, Right Rear, Rear Center, Left
Rear, Front Effect speakers, and Subwoofer.
the front panel display only as follows: Center, Right Rear, Rear Center, Left
Rear, Front Effect speakers, and Subwoofer.
3
3
Adjust the speaker volume level using the
+
or
–
on the remote control.
You can adjust the Center, Right Rear, Rear Center, Left Rear, Front Effect
speakers from +10 dB to –10 dB.
You can adjust the Subwoofer from 0 dB down to –20 dB.
speakers from +10 dB to –10 dB.
You can adjust the Subwoofer from 0 dB down to –20 dB.
Notes:
• You cannot adjust the left and right speakers independently.
• When you adjust the speaker level using
LEVEL
, the settings you made using the
Dolby Surround Test and DSP Test change.
• When
PARAMETER/SET MENU
is set to
SET MENU
, you cannot adjust the
speaker level using
LEVEL
. However, each time you press
LEVEL
the current
level setting of each speaker appears. Select the speaker level you want to check
using h or g.
using h or g.
• When the headphones are connected to this unit, the levels of the effect speakers
cannot be adjusted.
Setting the Sleep Timer
Use this feature to automatically turn off the main unit after the amount of time you set. The Sleep Timer is useful when you plan to fall
asleep while the main unit is reproducing or recording a source. The Sleep Timer also automatically turns off external components connected
to
asleep while the main unit is reproducing or recording a source. The Sleep Timer also automatically turns off external components connected
to
AC OUTLETS
. The Sleep Timer can only be set using the remote control.
■
To set the sleep timer
1
1
Select a source using the
INPUT
selector and start playback (or select a
broadcast station) on the source component.
2
2
Press
SLEEP
repeatedly to set the amount of time before the main unit
automatically turns off.
Each time you press
SLEEP
, the front panel display changes as shown below.
After a few seconds the display returns to the previous indication.
■
To cancel the sleep timer
1
1
Press
SLEEP
repeatedly until “SLEEP OFF” appears in the front panel
display.
After a few seconds, the display returns to the previous indication.
Note:
• The Sleep Timer setting can also be canceled by turning off the main unit using
STANDBY
on the remote control (or
STANDBY/ON
on the front panel) or by
disconnecting the AC Power Cord from the AC outlet.
EFFECT
LEVEL
CENTER
0dB
EFFECT
LEVEL
R SUR.
0dB
EFFECT
LEVEL
REAR CT
0dB
EFFECT
LEVEL
L SUR.
0dB
EFFECT
LEVEL
FRONT
0dB
EFFECT
LEVEL
SWFR
0dB
Center
Right Rear
Rear Center
Left Rear
Front
Subwoofer
SLEEP 120 min SLEEP 90 min
SLEEP OFF SLEEP 30 min SLEEP 60 min