Yamaha RX-V530RDS User Manual

4

Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the
component.

5

Adjust the volume to the desired level.
The volume level is displayed digitally.

Example:

–70 dB

Control range: VOLUME MUTE (minimum) to

0 dB (maximum)

The volume level indicator also shows the current
volume level as a bar graph.
If desired, use BASS and TREBLE. These controls
only effect the sound from the main speakers.

• If you increase or decrease the high-frequency or the low-

frequency sound to an extreme level, the tonal quality from the
center and rear speakers may not match that of the main left
and right speakers.

• If you have connected a recording component to the VCR

OUT, or MD/CD-R OUT jacks, and you notice distortion or
low volume during playback of other components, try turning
the recording component on.

6

Select a DSP program if desired.
Use PROGRAM l / h (DSP program buttons on
the remote control) to select a DSP program. See
pages 29 to 33 for details about DSP programs.
When using the remote control, press AMP before
selecting a DSP program.

VOLUME

VOLUME

BASS

–

+

TREBLE

–

+

■ BGV (background video) function

The BGV function allows you to enjoy video images
from a video source together with sounds from an audio
source. For example, you can enjoy listening to classical
music while having beautiful scenery from a video source
on the video monitor.

Select a source from the video group, then select a source
from the audio group using the input selector buttons on
the remote control. BGV selections cannot be made with
INPUT l / h on the front panel.

■ To mute the sound

1

Press MUTE on the
remote control.
To resume the audio output,
press MUTE again.

y

• You can also cancel mute by pressing VOLUME +/–, etc.
• During muting, the “MUTE” indicator flashes on the front

panel display.

■ When you have finished using

1

PROGRAM

STANDBY

/ON

STANDBY

MUTE

0105V530_23-28_EN(GB)

1/18/02, 6:41 PM

24