Yamaha RX-V470 User Manual

24

1

Press the lid's locking tab down and, at the same time,
pull out the battery compartment lid in the direction of
the arrow.

Remote control sensor

Within approximately
7 m (23 feet)

Notes
÷ There should be no large obstacles between the remote

control transmitter and the main unit.

÷ If the remote control sensor is directly illuminated by

strong lighting (especially an inverter type of fluorescent
lamp etc.), it might cause the remote control transmitter
not to work correctly. In this case, reposition the main unit
to avoid direct lighting.

2

Install the batteries (size AA, R6, UM-3) with correct
polarities.  Follow the diagram in the compartment.

+

–

+

–

3

Position the bottom portion of the compartment lid in
place, and push the top portion of the lid in until it clicks
into place.

If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak.  Replace
both batteries with new ones.

Notes
÷ Use only AA, R6, UM-3 batteries for replacement.
÷ Be sure the polarities are correct.  (See the illustration

inside the battery compartment.)

÷ Remove the batteries if the remote control transmitter will

not be used for an extended period of time.

÷ If batteries leak, dispose of them immediately.  Avoid

touching the leaked material or letting it come in contact
with clothing, etc.  Clean the battery compartment
thoroughly before installing new batteries.

30°

30°