Yamaha RX-V493RDS User Manual

19

1

Displays various information, for example station frequency,
preset station number and name of selected input source.

2

Lights up when an FM stereo broadcast with sufficient signal
strength is received.

3

Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.

4

Lights up while the built-in SLEEP timer is functioning.

5

The name of a selected center channel mode lights up only
when a program which uses the Dolby Pro Logic Surround
decoder is selected.

6

Lights up if neither the digital sound field processor nor the
Dolby Pro Logic Surround decoder is on. In this state, sound
output is 2-channel stereo.

7

Lights up when this unit is in the automatic tuning mode.

8

When the MEMORY button is pressed, this indicator flashes
for about 5 seconds.  During this period, the displayed station
can be programmed to the memory by using the A/B/C/D/E
button and the preset station number selector buttons.

9

The name(s) of RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of the indicator on
the head of a name shows that the corresponding RDS mode
is now selected.

0

Lights up while the search is performed in the PTY SEEK
mode.

A

Lights up when an RDS station that employs the EON data
service is received.

B

The name selected in the EON mode lights up.

C

Lights up when the tape deck (or MD recorder etc.) is selected
as the input source by pressing the TAPE/MD MONITOR
(MON) button.

D

The name of a selected DSP program lights up when the built-
in digital sound field processor and/or the Dolby Pro Logic
Surround decoder is on.

1

2 3

5 6

C

D

A

0

B

9

7 8

4