Yamaha RX-V757 User Manual

■

 E)LFE LEVEL

Use to adjust the output level of the LFE (low-frequency 
effect) channel according to the capacity of your 
subwoofer or headphones. The LFE channel carries low-
frequency special effects which are only added to certain 
scenes. This setting is effective only when this unit 
decodes Dolby Digital or DTS signals.
Choices: –20 to 

 dB

  SPEAKER

Select to adjust the speaker LFE level.

  HEADPHONE

Select to adjust the headphone LFE level.

Depending on the settings of “LFE LEVEL”, some signals may 
not be output from the SUBWOOFER OUTPUT jack.

■

 F)DYNAMIC RANGE

Use to select the amount of dynamic range compression to 
be applied to your speakers or headphones. This setting is 
effective only when the unit is decoding Dolby Digital and 
DTS signals.
Choices: MIN (minimum), STD (standard), 

 

(maximum) 

  SP

Select to adjust the speaker compression.

  HP

Select to adjust the headphone compression.
•

Select MIN if you regularly listen at low volume 
levels.

•

Select STD for general use.

•

Select MAX to preserve the greatest amount of 
dynamic range.

■

 G)AUDIO SET

Use to customize this units overall audio settings.

 MUTING TYPE

Use to adjust how much the mute function reduces the 
output volume.
Choices: 

, –20dB

•

Select FULL to completely halt all output of sound.

•

Select –20dB to reduce the current volume by 20 dB.

  AUDIO DELAY

Use to delay the sound output and synchronize it with the 
video image. This may be necessary when using certain 
LCD monitors or projectors.
Choices: 

 to 160 ms

 TONE BYPASS

Use to select whether audio output bypasses tone control 
circuitry when TREBLE and BASS are set to 0 dB (see 
page 31).
Choices: 

OFF

•

Select AUTO if you want signals to bypass tone 
control circuitry to provide the purest signal possible.

•

Select OFF if you do not want signals to bypass tone 
control circuitry.

.SPEAKER;;;;;;0dB

HEADPHONE

;;;;0dB

[]/[]:Up/Down
[<]/[>]:Adjust

p

p

E)LFE  LEVEL

.SP:MINSTD)MAX

HP:MINSTD

)MAX

[]/[]:Up/Down
[<]/[>]:Select

p

p

F)DYNAMIC RANGE

.MUTING TYPE;;FULL

AUDIODELAY

;;0ms

TONE BYPASS

;;AUTO

[]/[]:Up/Down
[<]/[>]:Select

p

p

G)AUDIO SET