Yamaha tdm850 1996 Manual
7-39
NOTE:
FRONT FORK
CHAS
CAUTION:
NOTE:
New
NOTE:
Before installing the oil seal, apply the lithium soap
base grease onto the oil seal lips.
base grease onto the oil seal lips.
Be sure that the oil seal numbered side face
upward.
upward.
7. Install:
Dust seal 1
Use the fork seal driver weight.
Use the fork seal driver weight.
Fork seal driver weight:
90890-01367
8. Fill:
Fork oil
Each fork:
0.515 L
For oil 10W or equivalent. After
filling, slowly pump the fork up
and down to distribute oil.
For oil 10W or equivalent. After
filling, slowly pump the fork up
and down to distribute oil.
Oil level:
130 mm
(from the top of inner tube fully
compressed without spring)
(from the top of inner tube fully
compressed without spring)
Place the fork on upright position.
9. Install:
O-ring
Cap bolt 1
Align the end of the cap bolt rod with the hole in the
damper rod, then install the cap bolt rod and tem-
porarily install the cap bolt.
damper rod, then install the cap bolt rod and tem-
porarily install the cap bolt.