Yamaha UW10 User Manual

One stereo-line recording
One stereo-line playback

Input:32 kHz, 44.1 kHz, 48 kHz
Output:32 kHz, 44.1 kHz, 48 kHz

Digital in jack (optical)
Digital out jack (optical)
Line in jacks (RCA pin, L/R)
Line out jacks (RCA pin, L/R)
USB connector
Headphone jack (stereo mini)

USB bus power supply

111(W) ×

×

×

× 65(D) ×

×

×

× 31(H) [mm]

95g

Optical digital cable (with optical plugs)

Specifications and descriptions in this Owner’s Manual are provided for 
information purposes only. Yamaha Corporation reserves the right to change or 
modify products or specifications at any time without prior notice. Since 
specifications, equipment or options may not be the same in every locale, please 
check with your Yamaha dealer.

● The driver cannot be installed.

• Is the USB cable connected correctly?

→ Check the USB cable connection. (page 13)
→ Disconnect the USB cable, then re-connect it.

• Is the USB function enabled on your computer?

→ When you connect the UW10 to the computer for the first time, if the “Add New 

Hardware Wizard” (page 16) does not appear, the USB function on the computer 
may be disabled. Perform the following steps.

1. Select [Control Panel | System | (Hardware) | Device Manager].

2. Make sure that “Universal Serial Bus Controller” and “USB Route Hub” are 

not marked with “!” or “x.” If one of these items is marked with “!” or “x,” 
you cannot use USB connections. For more information, refer to the docu-
mentation that came with your computer.