Yamaha yamaha av receiver rx-v373 rx-v373bl User Manual

PLAYBACK

➤ Listening to FM/AM radio

En

You can tune into a radio station by specifying its frequency or 
selecting from registered radio stations.

• The radio frequencies differ depending on the country or region where the unit is 

being used. The explanation of this section uses a display with frequencies used 
in U.K. and Europe models.

• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM 

antennas.

(Asia and General models only)

At the factory, the frequency step setting is set to 50 kHz for FM and 
9 kHz for AM. Depending on your listening environment, set the 
frequency steps to 100 kHz for FM and 10 kHz for AM.

When holding down STRAIGHT on the front panel, 
press z (power).

Press z (power) to set the unit to standby mode 
and turn it on again.

“TUNER” is selected as the input source and then the 
frequency currently selected is displayed.

Hold down the key for about a second to search stations 
automatically.

“TUNED” lights up when a signal is received from a radio 
station.

“STEREO” also lights up when a stereo signal is received.

• You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM 

radio reception by pressing MODE. When the signal reception for an FM 
radio station is unstable, switching to monaural may improve it.

• You can watch videos input from external devices while listening to radio by 

selecting the video input jack in “Video Out” (p.53) in the “Option” menu.

z (power)

STRAIGHT

PROGRAM

TUFM50/AM9

FM87.50MHz

FM98.50MHz