Yamaha yamaha mp3 docking station pdx-11 User Manual

Printed in China   ZA31240 

 

Indicate the status of PDX-11 and the connected iPhone/iPod. 
Green status indicator: 
PDX-11 is turned on and operating normally.
Red status indicator: 
An error has occurred or the volume has reached its maximum or minimum level.

The status of external device (connected through AUX) is not indicated.

 

When an iPhone/iPod and another external device are connected 
to PDX-11, audio can be enjoyed in many ways—for example, by 
playing music while listening to the news.

 

You can control the PDX-11's volume level by operating the volume 
control function on the iPhone/iPod.

 

 

You can enjoy listening to music anytime, anywhere.

Please confi rm that the following accessories are included before using 
the unit.
• Remote control   • AC adaptor

When the power is on, the green status indicator will light up.

When PDX-11 is left in the powered-on state without connecting to the 
iPhone/iPod and external device's connector cable, it will turn off in 30 
minutes.

The battery of the connected iPhone/iPod will be 
charged.

• The iPhone/iPod battery cannot be charged when PDX-

11 is being operated by batteries.

• Be sure to use a dock adaptor included your iPhone/

iPod or applicable commercially available dock 
adaptor. If you do not use an adaptor or the adaptor is 
not compatible, the connection may be loose or poor, 
causing damage to the connector. For more information 
about the dock adaptor, refer to Apple's website.

• If the iPhone/iPod is forcibly connected while still in a protective case, 

the connector may be damaged. Make sure to remove any protective 
iPhone/iPod case before connecting.

• When the unit is used with the iPhone/iPod’s shake shuffl e function on, 

the iPhone/iPod might shuffl e due to the vibration of speaker depending 
on the music played back. If this happens, turn the shake shuffl e function 
off. (Refer to the instruction manual of the iPhone/iPod to turn the 
function off.)

• Always disconnect iPhone/iPod from PDX-11, before carrying it by its 

handle.

• If the iPhone/iPod is connected while playing videos or music on the 

iPhone/iPod, PDX-11 will turn on automatically and continue the play 
(except when PDX-11 is in power-saving mode).

• You can always connect and disconnect the iPhone/iPod.
• The PDX-11’s volume level can be adjusted using the iPhone/iPod. The 

volume level will also be displayed on the iPhone/ iPod.

• PDX-11 turns off automatically, when the iPhone/iPod and external 

device's connector cable are disconnected.

Status indicator

(Green)

Status indicator
(Red)

Volume −

Power on/off

Volume +

©2011 Yamaha Corporation

If you start playback on the connected device, sound will come 
from the PDX-11's speakers.
iPhone/iPod's playback can be controlled using either the included 
remote control or the iPhone/iPod itself.

Select menu

Show iPhone/iPod's 
menu

Skip 
Backward/Forward

Select folder

Volume control

Play/Pause

Power on/off

Remove the insulation 
sheet before using.

Connect the included AC adaptor.

Connect the AC adaptor to 
PDX-11, before connecting 
the power cable to the wall 
outlet.

When using PDX-11 with 
batteries, disconnect the AC 
adaptor from the rear panel.

 

 

Pull out the battery case as 
shown in the diagram below 
and change a battery.

Back

While pushing the release tab in 
direction  , slide out the battery 
holder in direction  .

(20 feet)

To remove the battery cover, push the tab 
while lifting the cover upward.

Follow the + and – markings on PDX-11 
when inserting the batteries.

Replace the battery cover.

Use 6 commercially available AA batteries.

LED

Status

Green

Red

The PDX-11's power is ON. The iPhone/iPod is connected correctly. 
* If PDX-11 is not operated for 30 seconds, the green status 

indicator is dimmed.

Connection with iPhone/iPod is in progress, please wait.

An operation has been performed using the PDX-11's controls, the 
remote control, or the iPhone/iPod itself.

Refer to the "TROUBLESHOOTING".

The volume is at the maximum or minimum level. 

Blinks once

Blinks once

During battery-powered operation, if PDX-11 is left in the powered-off state 
without being operated for 30 minutes, power-saving mode will be activated and 
remote control will not work.
Push the      on the control panel of PDX-11 to cancel the power-saving mode.

Connect to the AUX on the rear panel.

To connect an external device 
to PDX-11, use a commercially 
available 3.5 mm (1/8 in.) 
stereo mini plug cable.

AUX

Dock adaptor

iPod dock

CR2025 button 
cell battery.

…Green indicator lit

…Red indicator blinking

…Green indicator blinking

…Indicator not lit

12V ---