Yamaha YSP-4300 User Manual

This unit supports the following capabilities to enjoy sound based 
on your preference.
• Switching between surround playback, stereo playback, and 

target playback modes

• Compressed Music Enhancer
• Volume adjustment for each channel
• CINEMA  DSP
• Switching between surround audio output methods
• Surround sound decoder

Press the STEREO key to switch between standard stereo and 
beam stereo playback modes.

When “STEREO” is selected, the front channels are the primary 
channel sources for output of stereo sound. 
When “BM STEREO” is selected, left and right channel sounds 
are output as sound beams from the front left and right channels. 
This expands the area to which sound is output.

Surround sound is output as sound beams. See page 36 for 
instructions on switching between the sound beam output 
methods.

Target playback mode focuses sounds from all channels as sound 
beams from a single channel to achieve optimal listening for a 
specified listener. See page 39 for more information.

Play back digitally compressed format such as MP3 and WMA, 
with emphasis on bass and treble for extended dynamic sounds.

Press the key again to turn the function off.

Volume for each channel can be adjusted during playback to 
balance audio output.

STEREO

BM STEREO

FL: Front left
FR: Front right
C: Center
SL: Surround left
SR: Surround right
SW: Subwoofer

S/T key to adjust the volume.

When My Surround (MY SUR.) is selected (

C: Center
SL/SR: Surround left and right
SW: Subwoofer

• By default, this function is set to “ON” when the input source is YIT 

or USB (YSP-4300 only). It is set to “OFF” with any other input 
source.

• Compressed Music Enhancer does not work in case of the following 

digital audio signals:
– Dolby TrueHD, DTS-HD Master Audio, etc. 
– Signal that sampling rate is more than 48 kHz.

Refer to “SPEAKER LEVEL” (

☞p. 62) when adjusting the volume of 

each channel with the test sound.

Example of volume balance
• If you have problems hearing words: Select C (center) to increase the 

level.
When the sound is not like surround sound: Select SL (surround left) 
and SR (surround right) to increase the level.

• The volume of the subwoofer also can be adjusted by using the 

SUBWOOFER (+/-) key.

y

y

y