4XEM stylus c86 User Manual

Page of 40
Removing and Installing Ink Cartridges
23
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once you start replacing a 
cartridge, you must complete all the steps in one session.
1. Make sure the printer is turned on (the green 
 power light should be on, 
but not flashing). Then open the printer cover.
2. Press and release the   ink button. 
The print head moves to the left, and the cartridge that needs to be replaced 
stops under the   ink out mark. The 
 power light begins to flash. 
Caution: 
Don’t hold down the
 
 ink button for more than 2 seconds, or the printer will start 
to clean the print head.
To avoid damaging the printer, never move the print head by hand.
3. Press the   ink button again.
If more than one cartridge is empty, the next cartridge moves under the 
 ink out mark.
If all the empty cartridges have been identified, the print head moves to 
the ink cartridge replacement position, as shown on the following page.
downloadlike
ArtboardArtboardArtboard
Report Bug