Enterasys Networks D2G124-12 User Manual

Setting User Accounts and Passwords

2-2 Basic Configuration

To change the switch’s default user login and password settings, and to add new user accounts 
and passwords.

The commands used to configure user accounts and passwords are listed below.

Save the active configuration.

Enable or disable SSH.

set ssh enable | disable

Enable or disable Telnet.

set telnet {enable | disable} [inbound | 
outbound | all]

Enable or disable HTTP 
management (WebView).

set webview {enable | disable}

Enable or disable SNMP port link 
traps.

set port trap port-string {enable | disable}

Set the per port broadcast limit 

set port broadcast port-string threshold-value

Configure a VLAN.

set vlan create vlan-id

set port vlan port-string vlan-id modify-egress

Set a Syslog server IP and 
severity 

set logging server index ip-addr ip-addr 
severity severity state enable

Configure and enable a RADIUS 
server.

set radius server index ip-addr 
port [secret-value]{realm {management-access | 
any | network-access} 

Configure and enable first arrival 
MAC locking on user ports.

set maclock firstarrival port-string value

set maclock enable port-string

show system login

set system login

clear system login

set password

set system password length

set system password aging

set system password history 

show system lockout