Emerson edvc860f User Manual

– 13 –

EN

• To go back one step, hit [

s

(during

steps 3) to 9) ).

ONE TIME PROGRAM

PROGRAM NUMBER   1
DATE

1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM
END

TIME 0 8 : 3 0 PM

CHANNEL

1 6

REC SPEED – –

Select the desired start time
(hour).

Select the minute.

ONE TIME PROGRAM

PROGRAM NUMBER   1
DATE

1 0 / 2 4 MON

START TIME 0 7 : 3 0 – –
END

TIME – – : – – – –

CHANNEL

– –

REC SPEED – –

ONE TIME PROGRAM

PROGRAM NUMBER   1
DATE

1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM
END

TIME – – : – – – –

CHANNEL

– –

REC SPEED – –

AM

B

PM

Select “AM” or “PM”.

Repeat the procedure in steps
5) and 6) to set the end time.

Select the desired channel.

• If you have connected the unit to a

cable box or satellite box as the
Connection on page 6, select the VCR
to channel 3 or 4 (the RF output chan-
nel of the VCR). Then, select the
desired channel at the cable box or
satellite box. Leave the cable box or
satellite box on for timer recording.

ONE TIME PROGRAM

PROGRAM NUMBER   1
DATE

1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM
END

TIME 0 8 : 3 0 PM

CHANNEL

1 6

REC SPEED SP

B

SP
SLP

Select the desired recording speed.

CLEAR/

C. RESET

1) Hit [SUBTITLE/T-SET] then, [VCR]

on the remote control.

2) Select main menu by hitting

[MENU].

3) Select 

“

TIMER PROGRAMMING

”

by pressing [K/L]. Then, hit [B].

4) Select the program number which

you want to check by pressing
[K/L]. The details of the program
you selected will appear on the TV
screen.

• Go to the digit you want to change

by pressing [s/B]. Then, enter
correct numbers by pressing
[K/L].

• You may cancel the entire pro-

gram by hitting [s] while the pro-
gram number flashes.

5) Hit [CLEAR/C.RESET] to exit.
6) Hit [SUBTITLE/T-SET] to return to

timer stand-by mode.

Hit [STOP/EJECT C

C

/A

A

] on the unit.

• To set another program after step 9), hit [B].

Then, continue with step 2).

or

or

or

or

or

• Hit [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR mode, then hit

• If a tape is not in the unit or does not have the record tab, 

flashes and Timer Recording cannot be performed. Please

insert a recordable tape.

• When Timer Recordings are set, 

on the front panel display will appear. To use the VCR as usual until the time for the

recording, hit [SUBTITLE/T-SET] so that 

disappears. Hit [VCR/TV] to choose the VCR position. Select either VCR or

DVD mode, then continue with the other features as described in this manual.

• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape and switches to the DVD mode

automatically. If the DVD power is off, the unit does not switch to the DVD mode but goes into the timer standby mode. Press
[SUBTITLE/T-SET] on the remote control or [STOP/EJECT C/A] on the unit, then hit [VCR] to activate the VCR function again.

• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is hit.

([OUTPUT] on the front panel and [VCR] on the remote control will not function.)

• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT C/A] on the unit, then

hit [VCR] to activate the VCR function again.

• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after you

cancelled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you operate.

• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically,

and 

on the front panel display appears to indicate the unit is in the timer standby mode.

• 

flashes if there are no more Timer Recordings on standby.

• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR function will be

unavailable.

on the front panel display will not appear as long as the DVD is in use. All the DVD functions are available

during OTR, timer standby mode and Timer Recording.

• Hit [POWER] to turn on the DVD. Hit [DVD] on the remote control to choose DVD mode, then continue with the other DVD

features as described in this manual. You don’t need to set the TIMER off to use the DVD player.

• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.

• 

on the front panel

display appears.
The unit will change to
the DVD mode.

SUBTITLE

T-SET

 H9803CD_EN.qx3  05.1.31 3:18 PM  Page 13