SMART Technologies board v280 User Manual

Page of 94
12 |
INSTALLING AND SECURING YOUR SMART BOARD V280 INTERACTIVE 
WHITEBOARD
Tools Required
To wall-mount your interactive whiteboard you’ll need the following tools, 
which aren’t included with your package:
a Phillips® No. 2 screwdriver
NOTE
All screws must be tightened by hand.
a ruler or tape measure
a carpenter’s level
a pencil or other marking device
a stepladder
Wall-Mounting Your Interactive Whiteboard
Follow this procedure to mount your SMART Board V280 interactive whiteboard 
on a framed wall surfaced with gypsum or drywall. Some notes are provided 
for concrete wall installations.
WARNING
Failure to follow these instructions might result in personal injury and 
product damage.
CAUTIONS
Do not lean your interactive whiteboard against a wall. Your interactive 
whiteboard’s frame and pen tray brackets are not designed to continuously 
sustain the product’s weight. Make sure that you carefully place it face down 
on a clean, flat surface instead.
Use only the screws included with your SMART Board V280 interactive 
whiteboard. Using other screws might damage your product.
IMPORTANT
After you lay your interactive whiteboard on a clean, flat surface, ensure that 
the camera USB cable connections are secure.
NOTE
To take full advantage of all the interactive features of your SMART product, you 
must connect a digital projector (not included).