SMART Technologies board v280 User Manual

INSTALLING AND SECURING YOUR SMART BOARD V280 INTERACTIVE 
WHITEBOARD

Aligning Your Interactive Whiteboard with Your Projector 
(Optional)

If your projector is installed in a fixed location, align your interactive whiteboard 
to the projected image before you secure the L-shaped tabs.

1. Install or position your projector on a projector 

platform or stand if necessary, and then turn it 
on and point the lens of your projector at the 
center of your interactive whiteboard’s screen.

2. Make fine adjustments to the image size, level 

and focus of the projected image, according 
to your projector manufacturer’s instructions.

3. Slide your interactive whiteboard sideways on 

its bracket to align it with the projected image.

4. Repeat steps 2 and 3 until your interactive 

whiteboard is properly aligned.

A correctly aligned image fits squarely on your interactive whiteboard’s screen. Each 
side of the projected image should extend almost to the edge of the display surface.

Completing Your Installation

Refer to the following procedure to finish installing your interactive whiteboard.

1. Push your interactive whiteboard securely 

against the wall, and then slide each L-shaped 
tab backward until it contacts the wall.

NOTE
Each of these tabs has an adjustment 
range of 1/2" (1.5 cm) to accommodate 
uneven wall surfaces.