Eizo TP1 User Manual
User’s Manual
TP1
Pointer for Touch Panel Color LCD Monitor
Thank you very much for choosing an EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.
Package Contents
____________________________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
Touch Panel Pointer
Pointer Holder
Screw for pointer installation
× 1
User’s Manual
How to install
________________________________________________________
A driver is required to install the touch panel pointer and pointer holder.
1
．
Touch Panel Pointer installation
Attach the wire lead of the pointer to the monitor by using the supplied screw.
NOTE
When the monitor has the stand-mounting holes on the rear, attach the TP1 into the lower hole.
When the monitor has the hole exclusively for TP1, attach the TP1 into it. (About the location of hole for TP1, refer to User’s
When the monitor has the hole exclusively for TP1, attach the TP1 into it. (About the location of hole for TP1, refer to User’s
Manual of the monitor.)
2
．
Pointer Holder installation
(1) Remove the upper screw from the rear of the monitor.
(2) Insert the stopper of the holder into the ventilation slot of the monitor.
(3) Fix the holder on the monitor by using the screw removed at step (1).
(4) House the pointer into the holder.
(2) Insert the stopper of the holder into the ventilation slot of the monitor.
(3) Fix the holder on the monitor by using the screw removed at step (1).
(4) House the pointer into the holder.
Specifications
________________________________________________________
(1) (2) (3)
Dimensions
Weight
Touch Panel Pointer
140 mm (L)
× φ 10 mm (5.5” (L) × φ 0.39”)
50 g (1.76 oz)
Pointer Holder
24.1 mm (W)
× 86.3 mm (H) × 28 mm (D) (0.95” (W) × 3.40” (H) × 1.10” (D))
10 g (0.35 oz)
■Dimensions
Unit: mm
(inch)
●
Touch
Panel
Pointer
●
Pointer Holder
NOTE
TP1 is designed for pointing on the screen. The drawing touch and dragging it on the touch panel is not guaranteed.
EIZO NANAO CORPORATION
153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630, U.S.A.
〒924-8566 石川県白山市下柏野町153番地
http://www.eizo.com
http://www.eizo.com
Copyright© 2003-2007 EIZO NANAO CORPORATION All rights reserved.
This document is printed on recycled chlorine free paper.
4th
Edition-November, 2007 Printed in Japan.
05D22953D1
(U.M-FP01)