Eagle Electronics consensus external dual-bay storage for 3.5' dual sata to usb 2.0 i User Manual

Powering Up the Drive

Press the power button to turn on the unit. Wait 3 seconds after blue light

illuminates.

Windows 2000/XP/2003/Vista

Your operating system will automatically detect the external drive after a “Found

New Hardware” message pop up.

Windows 98SE/ME

Note: Eagle | Consus does not provide any tech supports for Windows98

platform since Microsoft has discontinued Windows 98SE.

1. Connect Eagle | Consus I-SERIES Enclosure to your Computer. Turn on the

power.

2. Windows 98SE will detect a new device and activate Hardware Wizard, then

Click Next.

3. Select Search for the Best Driver for your Device. Click “Next” to continue

4. Insert the CD Driver in your CD ROM, then Browse the CD Driver Contain and

chose Win Folder. Click Next.

5. After installation Click Finish to restart your computer.

6. Once installation completes, you‘ll find USB Safe Remove icon in icon tray. If the

new hard drive doesn't appear in My Computer, it means the USB hard drive

is a brand new hard disk, which does not contain any partition, please format

your Hard disk before using this device.

Mac OS X

Your operating system will automatically detect the external drive. Once formatted

the Hard Drive, the Hard Drive icon will appear on the desktop.

Formatting the Drive

Windows XP/2000/2003/Vista

Note: For formatted Hard Drive, proceed to step 2.

1. Click the Start button and click on Control Panel, double-click the

Administrative Tools, and then double-click the Computer Management.

2. Click the Disk Management under Storage. Your new Hard Drive should

have the right capacity shown. (E.g. figure above Disk 1 is showing

approximately 160GB). Right click the Disk 1, and choose Initialize Disk.

Note: If your

Disk 1

is shown as

Basic

and

Online

, skip this step.