Echo 2410 - Type 2E User Manual

Before operation  a complete check of the unit must be performed;

• Check unit for loose/missing nuts, bolts and screws. Tighten and/or

replace as needed.

• Inspect fuel lines, tank and area around carburetor for fuel leaks.  DO

NOT operate unit if leaks are found.

• Never adjust blades when the engine is operating.

• Inspect hand guard for damage. Replace if damaged or missing.

• Check that the blade assembly is firmly attached and in safe operating

condition. Dull, loose or damaged blades should not be used.

• Before starting the unit, equip yourself and fellow workers in the 4.5 m

(15 ft.) safety zone with the required protective equipment and
clothing.

• Review the area to be trimmed. Look for hazards that could contribute

to unsafe conditions.

• Spectators, children and animals must be prevented from coming

nearer than 4.5 m (15 Ft.) while the Hedge Clipper is in use.