Echo PPF-225 User Manual

1.   Wipe debris from around oil fill cap.

2.    Remove oil fill cap and fill reservoir with a quality, low viscosity 

guide bar and saw chain oil.

The discharge volume of the automatic oiler is preset to deliver 3 

to 4 cc/min. at normal operating RPM. During heavy or dry cutting 

conditions the oil discharge volume may be adjusted to assure ad-

equate lubrication. Refill the oil reservoir with each tank of fuel.

To prevent plastic deterioration, do not use synthetic or silicone 

based oil.

Tools required:  Screwdriver

1.   From bottom of gear case, turn adjustment screw (A) clockwise to 

decrease oil volume - counter clockwise to increase oil volume.

Very little visible oil on the saw chain will provide sufficient lubri-

cation.