HP Compaq KB-9965 311059-041 User Manual

You can perform removal/replacement procedures for some server components without 
powering down the server. The following removal/replacement procedures are hot-plug 
capable: 

• 
• 
• 
• 
• 
• 
• 

Power supplies 

Processor and I/O fans 

Drive fans 

Front and rear processor air baffles 

SCSI hard drives 

PCI and PCI-X Hot Plug expansion boards (in hot-plug slots) 

Memory (refer to the “Memory” section in this chapter) 

 

 

  Do not hot-remove a power supply without a redundant power supply in place. 

 

 

  Hot-plug power supplies for the ProLiant ML570 Generation 2 server are keyed to 

make sure that only 600-W hot-plug power supplies can be installed in the server. The 
handles on 600-W power supplies are carbon (black) to distinguish them from other power 

supplies, which are opal (white). 

To remove a hot-plug power supply: 

1.  Release the AC power cord from the tie wrap on the power supply. 

2.  Unplug the AC power cord from the power supply.