Epson 500 Series User Manual

You can solve most printer problems by followinjg the instructions

in your printer manual. If you have just connectedthe printer, first
check that the pritner has power and is correctly connected to the

computer. See Chapter 4 for instructions on connecting a printer.

(The printer manual also gives instructions on cable connections.)

If you have a serial printer or if you have problems feeding paper,

check the printer manual for the correct DIP switch settings. Refer

to your printer documentation to see whether you need to use the

MODE command (described in the MS-DOS manual) to match the
serial settings.

If you have added extra memory to your system, and that memory

is not operating properly, check the following:

1. Make sure the Setup program is displaying the correct amount

2.  Did you insert memory module correctly? See "Installing a 

Memory Module” in Chapter 4.

3. Have you defined the memory properly in your CONFIG.SYS

file? See your MS-DOS manual for more information.

A-12

Troubleshooting