Epson equity 286 plus User Manual

3.

To run the program, press Y. To exit without running

CORFIX, 

press 

N. 

If you press Y, you see the MS-DOS

prompt and this message:

Configuration completed. The SMART

installation utility may now be

used.

4.

Use the 

SMART 

setup program now. See your RampagePlus

286+ manual for instructions.

After you install or remove options such as memory modules, a

math coprocessor, or a disk drive, you need to run the SETUP

program to update the computer’s configuration information.

For example, if you add a hard disk drive, you need to let the
computer know the type of drive you have installed. See

Chapter 2 for instructions.

If you replaced the battery for the real-time clock and CMOS

RAM, you must run SETUP to reconfigure your system and reset
the clock. See Chapter 2.

N o t e  

If you installed additional extended memory and want to use
any of it as expanded memory, see “Using Expanded Memory
Beyond 

1MB" 

in Chapter 4 for instructions.

If you install a hard disk drive that has never received a

hardware level format (such as some non-Epson hard disk

drives), you need to format the disk. Check the manual that

came with your drive, and then, if necessary, follow the
instructions in Appendix C to format your new hard disk.

5-44

Installing and Removing Options