Summit 42369 User Manual

42369 US 11/22/05

LOCATING YOUR GRILL

When determining a suitable location for your Summit

gas grill installation, give attention to concerns such as exposure to wind, proximity to traffi c paths, and

keeping any gas supply lines as short as possible. Never locate the Summit

gas grill in a garage, breezeway, shed, under an unprotected overhang, or other

enclosed area. Locate the grill and structure so there is enough room to safely evacuate the area in case of a fi re.

CLEARANCE FROM SURFACES OR STRUCTURES

WARNING: Clearance from any surface or structure is

24 inches (609.6 mm) from the back and sides of the grill.
Refer to “Typical Gas Supply Installation” before starting
installation.

WARNING: The structure, “island”, countertops, and

adjacent work areas for the built-in grill installation must be
built from noncombustible materials only.

NOTE: If you have questions on what materials are considered noncombustible,
contact your local building materials supplier or fi re department.

ny
S

face

Any Surface

24 inches (61 cm) Any Surface

24 inches

(61 cm)

24 inches

(61 cm)

Grill Frame

Note: For a countertop treatment: Recommended 3/4 inch
(19.1 cm) overhang. Notch front edge for frame to fully
slide in.

27 inches (685.8 mm) min. for
lid clearance

SUMMIT

BUILT-IN LP GAS GRILL INSTALLATION GUIDE

PLATINUM D4 , D6

BUILT-IN STRUCTURE CUTOUT DIMENSIONS
ALL DIMENSIONS ARE TO FINISHED SURFACES.

WARNING: All countertop fi nished surfaces must be

constructed of a noncombustible material.

Built-In Cutout Dimensions

Tolerances

1/4

” -

1/4

” -

1/4

21˝

1/4

” -

1/4

THIS GAS APPLIANCE IS DESIGNED

FOR OUTDOOR USE ONLY.

42369