Atdec th-va-2x2-nec x463 User Manual

Page of 5
                      Rev.02-06/25/12
 
 
2 Wide x 2 Deep Video Wall Display (Rear View)  
This display kit mounts the NEC X463UN 
LCD monitor in a 2 wide by 2 deep landscape 
configuration. The frame attaches to a wall and 
receives the LCD monitors by way of four machined 
fittings (per monitor) that thread into the monitor’s 
VESA holes. These fittings then insert into the frame’s 
channels. The monitor’s fittings secure to the frame 
with locking arms that provide an easy way to remove 
the monitors for service. A removable panel provides 
access for media players behind the frame. 
 
Important: Installing video displays is a serious 
endeavor that requires experienced professionals.  
Improperly prepared walls and other structures as 
well as the equipment being installed can result in 
property damage, injury and/or liability to the 
installing contractor.
 Do not proceed if any part of 
the installation is in doubt. 
 
Caution: Due to the wide variety of structures, 
environments, materials and installation methods, the 
installing contractor must exercise good judgment in 
selecting the proper mounting area. The mounting 
structure must be capable of supporting at least 5 
times the load of the installed equipment. Consult local 
building codes for further guidance.   
 
Follow these instructions for the most efficient and 
safest mounting results.   
 
Package Contents: 
1 pc 
Frame w/ locking arms assembled   
2 pcs 
Media player mounting bracket 
1 pc 
Adjustment wrench  
 
16 pcs  M6 Threaded stand-off button (black) 
9 pcs 
Wood Screw Hanger (Adjustable Lag bolts) 
9 pcs 
Flat washer, 5/16 
9 pcs 
Hex nuts, 5/16-18 
1 pc 
Instruction sheet 
 
Notes: 
Hardware to mount frame to the wall are included. 
 
Note:  
The assembled frame weighs approximately 65 lb/29.5 Kg and requires just one installer. Two installers recommended for installing the 
LCD monitors. 
 
Installation Instructions
TH-VA-2X2-NEC X463
Video Wall 2x2