Sharp PG-LX3500 User Manual

• Insert the batteries making sure the polarities correctly match

the m and n marks inside the battery compartment.

• Danger of explosion if battery is incorrectly replaced.

Replace only with alkaline or manganese batteries.

• Insert the batteries making sure the polarities correctly match the m and n marks inside the battery

compartment.

• Batteries of different types have different properties, therefore do not mix batteries of different types.

• Do not mix new and old batteries.

This may shorten the life of new batteries or may cause old batteries to leak.

• Remove the batteries from the remote control once they have run out, as leaving them in can cause them to leak.

Battery fluid from leaked batteries is harmful to skin, therefore ensure you wipe them first and then

remove them using a cloth.

• The batteries included with this projector may run down in a short period, depending on how they are kept.

Be sure to replace them as soon as possible with new batteries.

• Remove the batteries from the remote control if you will not be using the remote control for a long time.

• Comply with the rules (ordinance) of each local government when disposing of worn­out batteries.

The remote control can be used to control the 

projector within the ranges shown in the 

illustration.

• The signal from the remote control can be

reflected off a screen for easy operation.

However, the effective distance of the signal

may differ depending on the screen material.

When using the remote control

• Ensure that you do not drop it or expose it to

moisture or high temperature.

• The remote control may malfunction under a

fluorescent lamp. In this case, move the

projector away from the fluorescent lamp.

Remote control sensor

Remote control signal

transmitters

Remote control

33 n (10 m)

30°

30°