Sharp PG-LX3500 User Manual

Menu operation n Page 

2 DHCP Client Setting

Connect the LAN cable before turning the 

projector on. If not, the DHCP Client function 

does not work.

Selectable items

Description

On

Obtains configuration

parameters for TCP/IP network

automatically.

Off

Sets the TCP/IP manually.

Select “On” for “DHCP Client”. “Obtaining IP 

Address...” appears, then the menu screen 

appears. Confirm the parameters of IP 

Address, Subnet Mask and Gateway on the 

TCP/IP screen.
If the DHCP server is not available, “Could not 

obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the 

item 3.)

3 TCP/IP Setting

Set the TCP/IP manually.

  Enter “IP Address” using P, R, Q 

and O, then press ENTER.

Network

Setting the TCP/IP

Subnet Mask

IP Address

Gateway

1

5 5 .

2

9 2 .

0 0 0 .

1

5 5 .

2

6 8 .

0 0 0 .

1

5 5 .

2

5 0 .

0 0 0 .

0

0 0

0

0 2

0 0 0

  Enter “Subnet Mask” using P, R, 

Q

 and O, then press ENTER.

  Enter “Gateway” using P, R, Q 

and O, then press ENTER.

Selectable items

Description

IP Address

Factory default setting:

192.168.150.002

Enter an IP address

appropriate for the network.

Subnet Mask

Factory default setting:

255.255.255.000

Set the subnet mask to the

same as that of the computer

and equipment on the

network.

Gateway

Factory default setting:

000. 000. 000. 000

* When not in use, set to “000.

000. 000. 000”.

• Confirm the existing network's segment (IP

address group) to avoid setting an IP address

that duplicates the IP addresses of other

network equipment or computers. If

“192.168.150.002” is not used in a network

with an IP address of “192.168.150.XXX”, you

don't have to change the projector IP address.

• For details about each setting, consult your

network administrator.

4 Returning to Default 

This function allows you to initialize the 

Network settings you have made in the 

projector.

• If the values for IP Address, Subnet Mask or

Gateway of the projector have been returned

to the default settings, the computer cannot

be connected to the projector depending on

the computer’s network settings.

5 Restart Network Function

Restarts the network function.

Perform this function when the projector 

cannot be controlled via the network.