Sharp PG-LW3000 User Manual

Note that the connections to external 

equipment and power outlet should be 

done before performing the operations 

written below. (See pages 

 to 

.)

• The power indicator illuminates green.

• After the lamp indicator illuminates, the projector

is ready to start operation.

•

The lamp indicator illuminates to indicate the

status of the lamp.

Green: The lamp is on.

Blinking in green: The lamp is warming up.

• When switching on the projector, a slight

flickering of the image may be experienced

within the first minute after the lamp has been

illuminated. This is normal operation as the

lamp's control circuitry is stabilising the lamp

output characteristics. It should not be

regarded as faulty operation.

• If the projector is put into Standby mode and

immediately turned on again, the lamp may

take some time to start projection.

• When System Lock is set, the keycode input

box appears. To cancel the keycode setting,

input the keycode that you have already set.

See page

for details.

• The projector cannot be turned on while cooling.

•

If the power cord is unplugged from the outlet

or the breaker switch is turned off when the

projector is on, then the projector

automatically turns on when the power cord

is plugged into the AC outlet or the breaker

switch is turned on. (See page

.)

• English is the factory default language. If you

want to change the on­screen display to

another language, change the language

according to the procedure on page

STANDBY/ON button

Lamp indicator

Power indicator

           

STANDBY

button

ON button

On-screen display (confirmation message)

•

You can unplug the power cord from the AC

outlet even if the cooling fan is still running.