Sharp PG-LW3000 User Manual

• Do not remove the lamp unit from the

projector right after use. The lamp and parts

around the lamp will be very hot and may

cause burns or injury.

• Do not touch the glass surface of the lamp

unit or the inside of the projector.

• To avoid injury to yourself and damage to the

lamp, make sure you carefully follow the

steps below.

• Do not loosen other screws except for the

lamp unit cover and lamp unit.

• Unplug the power cord from the AC

socket.

• Leave the lamp until it has fully cooled

down (about 1 hour).

• Loosen the user service screw (1) that

secures the lamp unit cover. Slide the lamp

unit cover in the direction of the arrow and

then lift it up (2).

Lamp unit
AN­LX30LP

STANDBY/ON button

AC socket

User service screw

(for lamp unit cover)