Hitachi l42x01au User Manual

47

FUNCTION (continued)   

Size Switching (continued) 

RGB signal input 

You can select a suitable size depending on the resolution.

Full            4:3 

Display Area Selection Diagram 

Resolution Full 

4:3 

 640 x 400  (VGA) 

640 x 480  (VGA) 

800 x 600  (SVGA) 

1024 x 768  (XGA) 

1280 x 768  (WXGA) 

1280 x 1024 (SXGA) 

1360 x 768  (WXGA) 

Multi Picture Mode 

With this feature, you can watch different channels simultaneously on one screen in several ways. 

As for the available signals, please refer to "Recommended Signal List" on 

57

,

58

.

Activate the Multi Picture Mode in HDMI Mode

To activate Multi Picture mode in either TV, AV, HDMI, and RGB mode, press 

 on 

the remote control. 

2-picture mode 

You can watch two different pictures side by side. 
This mode is available in both TV mode and AV mode ( AV1~4 Input). 

Audio is output from the selected picture with the speaker icon. 
Switch the Input modes (HDMI1~3) on the Main-Screen. 
Switch the Input modes (DTT/TV and AV1~4) or change 
Channels on the Sub-Screen.

1. To shift the speaker icon 

, press 

 button. 

Ɣ

The speaker icon 

  will be shifted from A to B back-and-forth. 

2. To change the channel of the of the Sub -Screen 

Ɣ

Make sure that 

mark is located on the Sub -Screen. 

Ɣ

Press

to select channels. 

3. To change the Input mode of the Sub -Screen   

Ɣ

Make sure that the speaker icon is located next to the Input mode indication of 

the Sub -Screen 

Ɣ

Press Input Select buttons on the remote control. ( DTV/TV , AV1~4 are available)

Ɣ

The message “ Not Available” will be appeared on the screen when the 

combinations of the Input modes are not acceptable. 
(See the Table below for details.)

The selected picture with speaker icon 

Main-Screen       Sub-Screen

HDMI                     

  1