Edelbrock super victor v8 User Manual

©2006 Edelbrock Corporation

Rev. 05/06 - DC/mc

Catalog #71850
Brochure #63-0325

Please read both your DIRECT PORT OWNERS MANUAL and this JET MAP INSERT before installing your Edelbrock Nitrous
System. If you have any questions or comments, please contact our Technical Hotline at: 1-800-416-8628 from 7am - 5pm, Monday
through Friday, Pacific Standard Time or e-mail us at Edelbrock@Edelbrock.com.  Please fill out and mail your warranty card.

❑ 2 Victor Pro Nitrous Solenoid

❑ 2

Victor Pro Fuel Solenoid

❑ 8

Edelbrock E2 Nozzles

❑ 16

3/16” Tubing

❑ 16

Tube Sleeves

❑ 8

Blue Tube Nuts

❑ 2

1/8” Male Pipe Nipples

200 HP

24

20

5° - 9° Retard

250 HP

28

24

6° - 10° Retard

300 HP

32

28

7° - 11° Retard

350+ HP

36

32

*See Note

400+ HP

40

36

*See Note

500+ HP

44

40

*See Note

The horsepower gains listed above in the jep map are approximate gains. Depending on engine configuration and tuning, your gains may
be slightly different. The jet map is based on a nitrous system with a flowing fuel pressure of 6½ - 7 PSI. Any variations different than
6½ - 7 PSI will change your jet map and potentially damage your engine. We highly recommend using the Edelbrock Flow Test Tool
(P/N 76506) to set your flowing fuel pressure.

NOTE: When using the high horsepower settings with a direct port system, many variables come into play when setting proper timing
retard, such as timing with your previous horsepower settings, cylinder head configuration, compression ratio, tune-up, etc. We recom-
mend consulting your engine builder to determine proper timing retard before using these settings.

❑ 8

Red Tube Nuts

❑ 16

Compression Fittings

❑ 4

Distribution Blocks

❑ 2

90° Union Fittings

❑ 2

6AN Nitrous Filter Fitting

❑ 2

6AN Red Filter Fitting

❑ 56

Various Jets

 2700 California St.  Torrance  CA 90503