Sansui SLEDVD329 User Manual

15 EN

1

To turn on the TV, press POWER. (POWER 

indicator on the front of the unit changes green. 

It may take approx. 10 seconds for a picture to 

appear on screen.) The Setup Wizard function 

begins.

2

Press ▲ or ▼ to select “TV Location”, then press 

◀ or ▶ to select “Store” or “Home”. This product 

qualifies for ENERGY STAR In Home mode 

default setting. Then press ▼ or ENTER.
NOTE:

This unit has been preset to STORE 

brightness. This setting does not qualify 

under ENERGY STAR. To reduce brightness 

and energy consumption, change setting 

to ‘HOME’. This setting does qualify under 

ENERGY STAR.

•

3

Press ▶ or ENTER to go to next step.

4

Press ◀ or ▶ to select your time zone, then 

press ▼ or ENTER.

In the rare event that you live within broadcast 

range of two stations in two different time 

zones, the TV may recognize the wrong 

station for the auto clock set.

•

5

Press ◀ or ▶ to select daylight saving time on 

or off, then press ▼ or ENTER.

6

Press ◀ or ▶ to select desired time format, then 

press ▼ or ENTER.

7

Press ▶ or ENTER to go to next step.

8

Press ▲ or ▼ to select “Air/Cable”, then press 

◀ or ▶ to select signal type that you using, then 

press ▼ or ENTER.

9

Press ▶ or ENTER to go to next step.

10

Auto Scan will begin. After tuning is completed, 

the TV channel appears on the screen.

Depending on the reception condition, it 

may take up to 30 minutes to complete 

memorizing digital cable channels. Please 

allow the process to complete without 

interruption.

•

If you press MENU or EXIT in the process of “Auto Scan”, 

the Auto Scan stops and changes to normal screen.

When you make a menu selection, your changes occur 

immediately. You do not have to press MENU to see your 

changes.

•

•

TV operation
1

To turn on the TV, press POWER. (POWER 

indicator on the front of the unit changes green. 

It may take approx. 10 seconds for a picture to 

appear on screen.)

2

Adjust the volume level by pressing VOL + or – . 

The volume level will be indicated on the screen 

by brown bars. As the volume level increases, so 

do the number of bars. If the volume decreases, 

the number of brown bars also decreases.

3

Set the signal type option to the appropriate 

position (see “Air/Cable selection” on page 20).

4

Press the Direct Channel Selection (0-9, –) 

buttons to select the channel.

(If you press only channel number, channel 

selection will be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS

1-9: 

Press 1-9 as needed. Example, to 

select channel 2, press 2, then press 

ENTER.

10-99: 

Press the 2 digits in order. Example, 

to select channel 12, press 1, 2, then 

press ENTER.

100-135:  Press the 3 digits in order. Example, to 

select channel 120, press 1, 2, 0, then 

press ENTER.

Press the first 1-3 digits, then press the – button, 

followed by the remaining number.

Example, to select channel 15-1, press 1, 5, –, 1, 

then press ENTER.

If a channel is selected with only audio content, 

“Audio Only” will be displayed on the screen.

If a channel is selected with a weak digital 

signal, “No Signal” will be displayed on the 

screen.

  The same program may be available on either 

an analog channel or a digital channel. You may 

choose to watch either format.

•

•

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) 

(W)

37-59 (AA) 

(WW)

60-85 (AAA) 

(ZZZ)

86-94 (86) 

(94)

95-99 (A-5) 

(A-1)

100-135 (100) 

(135)

01 (4A)

If a channel with no broadcast is selected, the sound will 

automatically be muted.

It may take a few seconds for a digital channel picture to 

appear on screen after being selected.

To view a signal from another device connected 

to your TV, such as a VCR player, press INPUT 

SELECT, then press ▲ or ▼, then press ENTER.

•

•

J59C0321A_EN.indd   15

J59C0321A_EN.indd   15

11/27/12   5:22:21 PM

11/27/12   5:22:21 PM