Sansui SLEDVD329 User Manual

27 EN

3

On the screen, “ ” changes to “Loading” and then 

playback will commence.

A menu screen may appear on the TV screen, 

if the disc has a menu feature. In this case, 

press ▲, ▼, ◀, ▶ or ENTER to operate a menu 

feature.

•

4

Press STOP ( ) to end playback.

The unit can record where you stop a video, but it 

depends on the disc you are using. Press PLAY 

( ) to resume a playback point. The unit can 

store the stopped points of the last five discs 

that you have played. When one of these discs is 

reloaded, you can resume playback from where 

you stopped playing last time.

If you press STOP ( ) again (“Resume off” 

appears on the screen) the unit will clear the 

stopped point.

You cannot save a stopped point for some discs. 

If a number of discs played and stored in the unit 

exceeds five, a new memory will overwrite the 

oldest stored memory.

•

•

•

5

Press  

(EJECT).

Remove the disc and then press POWER.

The unit turns off.

When you eject the disc, you may hear some 

mechanism noise, but it is not a malfunction.

•

If a non-compatible disc is loaded, “Can’t play disc” 

or “Incompatible disc region number Can’t play 

disc” will appear on the TV screen according to the 

type of loaded disc. In this case, check your disc 

again (see page 9).

Some discs may take a minute or so to start 

playback.

A prohibition message “Depending on the disc, this 

operation may be prohibited” or “This operation 

can’t be performed” may appear on the screen. 

This message means either the feature you tried is 

not available on the disc, or the unit cannot access 

the feature at this time. This does not indicate a 

problem with the unit.

When you insert a single-faced disc label backwards 

(i.e. the wrong way) “Loading” will appear on the 

display and then “Can’t play disc” will be displayed.

Some playback operations of DVDs may be 

intentionally fixed by software producers. Since 

this unit plays DVDs according to the disc content 

recorded, some playback features may not be 

available. Also refer to the instructions supplied with 

the DVDs.

•

•

•

•

•

Before DVD/CD operation, please make the following 

preparations.

1

Insert the AC cord plug into a standard 120V 

60Hz polarized AC outlet. 

If the AC cord plug is plugged in for the first 

time, wait for about 5 seconds before pressing 

POWER.

When connecting to other equipment, unplug 

the unit from the AC outlet.

•

•

2

Press POWER on the unit or on the remote 

control to turn on the unit. The POWER indicator 

will change to green.

When using an amplifier, switch on the amplifier. 

•

3

Press TV/DVD to select DVD mode.

The DVD startup screen will appear on the screen.

If the DVD is not operated, the unit will 

automatically shut itself after 15 minutes.

•

Static electricity, etc., may affect the player’s 

operation. Disconnect the AC power cord once, 

then connect it again.

If the unit is slanted or moved while inserting a disc, 

the disc may be damaged.

Press DISPLAY. The status display of the disc will 

appear on the screen.

Display messages may change each time you press 

DISPLAY for some discs or files.

To make the status display screen disappear, press 

DISPLAY again.

Playback procedure
1

Press TV/DVD to select DVD mode.

2

Place the disc in the 

disc slot with the label 

side facing forward. (If 

the disc has a label.) 

Hold the disc without 

touching either of its 

surfaces, align it with 

the guides, and place it 

in position.

•

J59C0321A_EN.indd   27

J59C0321A_EN.indd   27

11/27/12   5:22:32 PM

11/27/12   5:22:32 PM