SVAT Electronics CLEARVU3 User Manual

now you can see

CLEARVU3

5

1.  Press the “DISP” button to turn the onscreen display ON or OFF. The 

onscreen display shows the channel, date, and time.

2.  Press the “INFO” button to display system information and configuration.
3. 

When the hard disk information icon turns to red, this indicates that the hard drive 

is full. To avoid this situation, set the DVR recording mode to OVERWRITE.

4. 

Press the channel buttons to switch between full screen camera views. 

 

(CH1 – CH8).

5.  Press the “SPLIT” button to switch between “Full Screen/Quad Screen/

 

9-Split Screen”.

6.  Press the “SEQ” button to turn Sequence Mode on or off. Full screen channel 

auto sequence will skip the channels that show video loss (i.e. the cameras that 

are unplugged or not powered on).  

7.  When video loss occurs, a video loss message will be shown on the screen. 

8.  During  an  alarm  triggered  event  the  corresponding  channel  name  will  be 

changed to the color red.

9.  During  a  motion  triggered  event  the  corresponding  channel  name  will  be 

changed to the color red and display “M”. 

10.  When an alarm event occurs, the SPOT monitor (when plugged into the SPOT 

Out port) will immediately switch to the full screen view of the channel that has 

been triggered by an alarm event, and will then return to previous channel 

 

switching status. 

11.  Live monitoring operations have no effect on recording functions.