SVAT Electronics CLEARVU3 User Manual

now you can see

CLEARVU3

40

Note: For best results, a maximum of 20 simultaneous users is suggested.  
Delete User: Delete user account.

Current Users: Currently registered users.
Reboot: Restart the Network DVR.

Firmware update: Updates the firmware, if a new firmware version becomes available. 
Firmware updates may be available at www.SVAT.com (advanced users only).

Restore factory default configuration: Click “Restore factory default configuration” to return to 

factory default settings 

Before calling technical support 1.866.946.7828, try the following troubleshooting tips:

Problem

Solution

No picture

-    Make sure the TV/monitor is on the correct input channel
-    Check all connections and make sure cameras/DVR               

are powered on

No sound

-    Make sure that audio is enabled in the DVR menu

-    If using a microphone, ensure that it is connectedb 

and turned on

-     If using an audio supported camera, ensure that 

sound is enabled

-    Check all RCA audio connections

No images is shown on the 

web page

-    Please follow “8.4.1 Install ActiveX”, setup the IE set-

tings, and install ActiveX.

IPEdit is unable to detect 
the DVR’s IP Address

-    Please check your firewall or antivirus software

     Some software may block IP edit from accessing the 

network. In Windows Firewall, you may have to add 

IPedit.exe to the “exceptions” list. 

-    Reconnect the Ethernet cable

-    See the network guide for more troubleshooting tips.