Auto Page rs-855lcd User Manual

 

 

13

melody sound continues sounding from you Remote LCD Transmitter and 

“

” indication flashes on the LCD screen. 

1.  Press the transmitter 

  button first, within 3 

seconds press  

  (

)  button to activate outdoor 

driver paging function , It responds with chirps of the 

vehicle, a melody sound and "

" indication flashes 

on the LCD screen to confirm the function is on. 

2.  When tapping the paging (knock) sensor, one chirp 

sound shall be emitted from the vehicle and the 
paging melody sound continues sounding from you 

Remote LCD Transmitter and “

” indication flashes 

on the LCD screen. 

Turn on the ignition switch; OR press the 

 button to 

arm the system; OR press the 

 button to   

 disarm the system, this outdoor driver paging function 
will exit.

  

S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION 

The alarm with a unique feature which will turn on your vehicle dome light as 
following: 
1. Upon disarming, the interior light will remain on for 30 seconds. 
2. If the vehicle is intruded, the interior light will flash for the same duration as 

the siren. 

Note: Turn on the ignition switch or arm the alarm will turn off the dome light.

 

 

If the vehicles door locks have been interfaced to the security system, the 
system will automatically lock the vehicle's doors when the ignition is turned 
“ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.

   

  

Press and hold 

 button on the transmitter for two 

seconds to remote control the trunk release or other 
electric devices.   

 

Press the transmitter 

  (4) and 

 (4) button at the same 

time to active Channel 4 function. Channel 4 is 
user-programmable timer output. You may program the 
built-in timer to send a ground signal for any time duration 
from 1 second to 120 seconds. For instance, this timer 
output may be used to turn on the headlight, power window 
or sunroof. (Factory defaults setting at momentary output.)