Siemens gigaset c475 ip User Manual
81
Operating the base station answer machine
Operating when on the move (remote operation)
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 18.12.07
Ve
rs
ion 2.
1,
08.0
1.20
07
Operating when on the move (remote operation)
You can check and activate your answer machine from any other telephone (hotel, pay
phone etc.), or initiate ringback from the answer machine with an SMS.
Preconditions:
u
You have set a system PIN other than 0000 (page 115).
u
The phone you are using for remote operation has touch tone dialling (DTMF), i.e. you
hear different tones when you press the keys. Alternatively, you can use a code trans-
mitter (available from your mobile phone retailer).
Calling the answer machine and playing back messages
Precondition: Your answer machine is activated.
~
~
Dial your own number that is assigned to the answer machine as a receive
number.
9 ~
When you hear your announcement, press
9 and enter the system PIN.
You will be informed whether any new messages have been recorded. The messages are
now played back. All messages are played back irrespective of their receive number. After
the new messages, the old messages are played back. Finally, the remaining memory time
is given.
You can control message playback by means of the keypad.
You can control message playback by means of the keypad.
Operating the answer machine via the keypad
The following keys are used for operation:
A Previous:
A Previous:
Go to the start of the current message. Press repeatedly to go to the previous
messages.
B Stop/resume:
Stop playback: Press again to resume.
If there is a pause lasting longer than one minute, the connection to the answer
machine is terminated.
3 Next:
Skip to next message. Press several times to go to the following messages.
Please note:
Remote operation via VoIP connections is possible as long as DTMF signals are transmitted (depend-
ing on the provider) as SIP info messages, audible signals in the voice channel (inband or audio) or
as special RTP data packets (pursuant to RFC2833).
Please note:
The answer machine will terminate the connection under the following circumstances:
– an incorrect system PIN has been entered.
– there are no messages in the answer machine
– after the remaining memory announcement
– an incorrect system PIN has been entered.
– there are no messages in the answer machine
– after the remaining memory announcement