Sennheiser SK 500 G3 User Manual
21
Adjusting settings via the operating menu
Adjusting settings via the
operating menu
operating menu
The main menu “
Menu
”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to –60 dB, adjustable in steps of 3 dB
Make use of the possibility to adjust settings via the
operating menu of your receiver and to transfer
these settings to the bodypack transmitter.
operating menu of your receiver and to transfer
these settings to the bodypack transmitter.
For more information, refer to the instruction
manual of the receiver. The relevant information is
marked with the sync icon.
manual of the receiver. The relevant information is
marked with the sync icon.
The audio level display “
AF
”
always indicates the
audio level, even if the bodypack transmitter is
muted, e.g. allowing you to check the adjusted
sensitivity before live operation.
muted, e.g. allowing you to check the adjusted
sensitivity before live operation.
Input sensitivity is
adjusted...
adjusted...
Effect/display
... too high
Close talking distances, speakers
with loud voices or loud music
passages cause overmodulation in
the transmission link. The yellow
with loud voices or loud music
passages cause overmodulation in
the transmission link. The yellow
AF PEAK
LED
lights up. The audio
level display “
AF
”
shows full
deflection for the duration of the
overmodulation.
overmodulation.
... correctly
The audio level display “
AF
”
shows full deflection only during the
loudest passages.
loudest passages.
... too low
The transmission link is undermodu-
lated. This results in a signal with
high background noise.
lated. This results in a signal with
high background noise.
Menu
–12 dB
Sensitivity
–12
dB
Sensitivity
–36
dB
Sensitivity
“Stored”
Call up
“Sensitivity”
“Sensitivity”
Select the desired
setting
setting
Store the setting
SET
SET
MHz
542.625
B.Ch: 20.30
MUTE
AF