Simplicity Manufacturing 5900608 zt18441khc User Manual

The seat and ground speed control levers should be
adjusted so that operator’s elbows are supported by the
arm rests when his/her hands are on the controls, and
the ground speed control levers can be moved through
their full range of motion without contacting the operator’s
legs. 

The seat can be adjusted forward and back.  Move the
adjustment lever (A, Figure 10) towards the left hand side
of the machine, slide the seat to the desired position, and
release the lever.

7/2005

TP 300-7237-IR-HZ-N

This unit is equipped with safety interlock switches.
These safety systems are present for your safety, do
not attempt to bypass safety switches, and never tam-
per with safety devices. Check their operation regular-
ly.

• PTO switch is engaged, OR

• Parking brake is not engaged, OR

• Motion control handles are not in their NEUTRAL

positions.

• PTO switch is NOT engaged, AND

• Parking brake is engaged, AND

• Motion control handles are locked in their NEU-

TRAL positions.

• Operator rises off seat with PTO engaged, OR

• Operator rises off seat with parking brake disen-

gaged, OR

• Operator moves motion control handles out of their

neutral positions before disengaging parking brake.

The mower blades and mower drive belt should come
to a complete stop within five seconds after the electric
PTO switch is turned off (or operator rises off seat). If
mower drive belt does not stop within five seconds, see
your dealer.

NOTE: Once the engine has stopped, the PTO switch
must be turned off, parking brake must be engaged,
and the ground speed control handles must be locked
in their NEUTRAL positions in order to start the engine.