Sennheiser SKM 2000 User Manual

27

Synchronizing the radio microphone with a receiver

Synchronizing the radio microphone with 
a receiver

When synchronizing the radio microphone with a receiver, please observe
the following:

Synchronizing the radio microphone with the 
receiver – individual operation

Upon delivery, the radio microphone and the receiver are synchronized
with each other. If, however, you cannot establish a transmission link
between radio microphone and receiver, you have to synchronize the
channels of the devices.

For information on automatic synchronization of the radio microphone
with the receiver (individual operation), refer to the instruction manual of
the receiver. This information is marked with the 

 icon.

Alternatively, you can set the channel on the radio microphone manually:

Make sure that you set the radio microphone to the same frequency
bank and the same channel as the receiver (see page 21).

If you still cannot establish a transmission link, read the chapter “If a
problem occurs ...” on page 30.

Synchronizing radio microphones with receivers – 
multi-channel operation

Combined with 2000 series receivers, SKM 2000 radio microphones can
form transmission links that can be used in multi-channel systems.

For information on automatic synchronization of radio microphones with
receivers (multi-channel operation), refer to the instruction manual of
your receiver. For more information on multi-channel operation, visit the
SKM 2000 product page at www.sennheiser.com.

Only use a transmitter and a receiver from the same frequency
range (see the type plates on the transmitter and the
receiver).

Make sure that the desired frequencies are listed in the
enclosed frequency information sheet.

Make sure that the desired frequencies are approved and legal
in your country and, if necessary, apply for an operating
license.