Tascam CD-DJ1 User Manual

The two modes for setting cue point are as follows.

Play mode (default setting):

The cue point is automatically set as the last playback 
start point.

Cue mode:

The cue point is set as the point where the unlit 

CUE

 

key is pressed when the CD is paused or during scrub 
playback.

Press the 

CUE

 key while holding down the 

SHIFT 

key to display the current mode (

PLAY or CUE) briefly. 

Change the mode by pressing the 

CUE

 key again 

while the mode is displayed.

The setting can also be changed by selecting 

PLAY or 

CUE in the Setup menu CUE KEY item.

NOTE

A cue point can be set that allows you to pause play-
back and jump to that point by pressing the 

CUE

 key.

The unit's DJ functions include Cue, Hot Cue (Flash Start), Loop playback, Tempo control, and Pitch bend.

By pressing the 

CUE

 key once, you can pause play-

back and jump to the cue point. If you press and hold 
down the 

CUE

 key again, playback continues from 

the cue point until you release the key.

When you release the 

CUE 

key, playback pauses and 

the playback position resets to the same cue point.

The cue point can be confirmed using this function.

To resume normal playback, press the 

PLAY/PAUSE

 

key during playback while holding down the 

CUE

 

key.

The CD-DJ1 has two 

HOT CUE

 keys (

1

 and 

2

) that 

allow you to set independent Hot Cue points. After 
a Hot Cue point has been set, pressing its 

HOT CUE

 

key either starts or pauses playback at that point.

Use the Setup menu FLASH Start item to set whether 

HOT CUE

 keys start or pause playback (see “Flash 

Start” on page 17).

Press an unlit 

HOT CUE

 key during playback, pause, 

or scrub playback. The Hot Cue point for that key 
will be set and the key will light up.